For the Ultimate Sweater Machine®

Textured Wrap

designed by Kathy Perry

 

TECHNIQUE USED
Corrugated lifted stitch

FINISHED MEASUREMENT
Approx 24"/61cm (wide) x 65"/165cm (long)

YARN
Caron International's Simply Soft® (100% acrylic, 6oz/170g, 315yds/288m):Shown in: #0014 Pagoda 1 skein (A), #0012 Passion 1 skein (B)
Caron International's Simply Soft® Paints (100% acrylic, 4oz/113g, 200yds/182m):Shown in: #0007 Harlequin 2 skeins (C)

KEY PLATE
USM/ISM KP 3 or appropriate tension to obtain gauge

Suitable for USM/ISM/Bond Classic or 6.5 to 9 mm knitting machine

ADDITIONAL MATERIALS
Single prong transfer tool
2-prong transfer tool
3-prong transfer tool
Claw weights
WY
Tapestry needle

OPTIONAL
Row counter

GAUGE
In Simply Soft Collection with KP3 and St stitch, 16 sts and 22 rows = 4”/10 cm

STITCHES USED
Stockinette st (St st)
Corrugated lifted stitch
Eyelet stitch (see Charts 1 & 2)
(NOTE: See Chart 2 for eyelet variation)

CORRUGATED LIFTED STITCH

K10R. Select 2nd ndl and every foll 6th ndl across row. Pick up the purl "bump" 10 rows below each selected ndl and place on ndl (2 stitches on ea selected ndl).  Put all ndls in FWP with latches open.

NEEDLES REQUIRED 93

WRAP

  • Side A: Using KP 3 and closed CO method with A, CO 93 sts. COR. RC=000.
  • Work 10 row eyelet edge from Chart 1. RC=010.
  • *Work 8 row pattern from Chart 2.
  • Work 10 row Corrugated lifted stitch. K2R.* RC=030.
  • Repeat from * to * 5 additional times. RC=130.
  • Take off on WY.
  • Side B: Using B, make a second piece exactly like Side A and take off on WY.
  • Center C: Using WY, CO 93 sts. K 6 R. Break off. Change to C. COR. RC=000.
  • K8R, work 10 row Corrugated lifted stitch and K2R. Repeat this step 6 additional times. RC=140.
  • K6R and take off on WY.

FINISHING

  • Graft (or seam on machine) Sides to Center foll picture.
  • Weave in ends.